6 Watts UV Sterilizer
R574.17
The 6 Watts UV Sterilizer is a UV sterilization solution for safer water disinfection. In stock now at Monster Mechanical.
✅ In Stock — Ready to Ship
6 Watts UV Sterilizer | UV Water Steriliser
The 6W UV Sterilizer from Monster Mechanical delivers effective, chemical-free disinfection for smaller water treatment systems. Because it uses a 6-watt UV-C lamp, it neutralises harmful microorganisms — such as bacteria and viruses — without altering your water’s taste or quality. In addition, the inline stainless-steel chamber reflects UV light internally, which ensures maximum disinfection even at low flow rates.
Key Features of the 6W UV Sterilizer
- 6W UV-C Lamp: Provides germicidal UV output that protects water from microbial contamination.
- Stainless Steel Reactor Housing: Built with SUS304 material, the chamber is strong, corrosion-resistant, and promotes efficient UV exposure.
- Quartz Sleeve: Protects the lamp from direct water contact while maintaining efficient UV transmission.
- Low Flow Compatibility: Designed to work well in point-of-use or RO systems; similar models run at ~1 L/min or 112 L/h.
- Long Lamp Life: Many 6W UV systems feature lamps rated for more than 8,000 hours of use.
Benefits
Using the 6W UV Sterilizer gives you several advantages. First, it disinfects water without chemicals, which means your water stays clean and natural. Next, its compact design makes it easy to install on smaller systems like RO units or under-sink lines. Moreover, because the system requires minimal power and maintenance — just lamp replacements periodically — it remains a cost-effective solution. Finally, the durable stainless-steel reactor ensures that your UV system will serve you reliably over time.
Ideal Applications
This inline UV unit is perfect for:
- Point-of-use or under-sink water systems
- Reverse Osmosis (RO) post-treatment
- Small whole-house lines with modest flow
- Rainwater collection taps or small tanks
- Laboratory or small commercial water lines
Maintenance & Care
- Replace the 6W UV lamp after around 8,000 hours (or as recommended) to maintain disinfection strength.
- Clean the quartz sleeve during every lamp change to remove mineral buildup and preserve UV intensity.
- Use a sediment pre-filter if your feed water has turbidity — clear water improves UV effectiveness.
- Check and replace O-rings to prevent leaks and keep the system sealed.
Why Choose Monster Mechanical’s 6W UV Sterilizer?
Monster Mechanical’s 6W UV Sterilizer stands out because it combines compactness, efficiency, and durable performance. Whether you’re treating drinking water, using it in RO systems, or protecting a small installation, this unit provides effective disinfection without chemicals. Moreover, its low power consumption and long-life lamp make it economical to run. With reliable construction and consistent UV output, it’s a smart choice for keeping your water clean and safe.
Technical Specifications — 6W UV Sterilizer
| Specification | Typical Value / Note |
|---|---|
| Model | 6W UV Sterilizer |
| UV Lamp Power | 6 W (UV-C germicidal lamp) |
| Lamp Current | ~150 mA (typical) |
| Lamp Life | ~8,000 – 9,000 hours (replace when output drops) |
| Quartz Sleeve Diameter | ~16–23 mm (standard sleeve) |
| Quartz Sleeve Length | ~150–220 mm (varies by housing) |
| Flow Rate (recommended) | ~1 L/min (~60 L/h) — suitable for point-of-use / under-sink systems |
| Housing Material | SUS304 stainless steel (inline reactor) |
| Inlet / Outlet Connections | ½″ BSP / ½″ (12.7 mm) standard plumbing fittings |
| Connection Size (alternate) | Flexible: adaptors available for 3/8″ or ¾″ where required |
| Electrical | 110–240 V / 50–60 Hz (use specified ballast) — confirm with product label |
| Power Consumption | ~6 W (lamp) + ballast losses (small standby draw) |
| Dimensions (approx.) | Length: 200–260 mm • Body Ø: 30–45 mm (varies by model) |
| Net Weight (approx.) | 0.4 – 0.8 kg |
| Operating Temperature | 5 °C – 40 °C (ambient) — avoid freezing or extreme heat |
| Recommended Pre-Filtration | Sediment / 5 µm filter (required if feed water has turbidity or particles) |
| Mounting | Inline (horizontal or vertical) with brackets — keep access for maintenance |
Shipping and Delivery
Monster Mechanical delivers nationwide across South Africa. Orders are processed once payment is confirmed, and dispatch timing depends on product type, stock availability and whether your system is built to order.
Delivery Information
- In-stock components and smaller items are usually dispatched within 1–3 business days.
- Larger RO systems, custom assemblies and project orders may require additional build or handling time before dispatch.
- Delivery times vary by destination and courier service, with major centres typically faster than regional or outlying areas.
For bulky equipment, installation-related deliveries or urgent requirements, please contact our team before ordering so we can confirm lead times, freight options and the best delivery solution for your location.
